dpengineers

Author: admin

  • Dwyer ADPS-05-2-N Adjustable Differential Pressure Switch

    Dwyer ADPS-05-2-N Adjustable Differential Pressure Switch

    Product Details:

    Brand Siemens, Baumer
    Media Type Gas, Liquid

    Dwyer ADPS-05-2-N Adjustable Differential Pressure Switch
    Adjustable differential pressure switch, set point range 0.80 to 4.00″ w.c., M20 connection.
    Features
    Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
    The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
    The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications
    Specifications
    Service: Air and non-combustible, compatible gases
    Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
    Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
    Switch Type: Single-pole double-throw (SPDT)
    Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
    Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
    Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
    Enclosure Rating: NEMA 13, IP54
    Mounting Orientation: Vertically, with pressure connections pointing downwards
    Mechanical Working Life: Over 106 switching operations
    Weight: 5.6 oz (160 g)
    Applications
    Monitoring air filters and ventilators
    Monitoring industrial cooling-air circuits
    Overheating protection for fan heaters
    Monitoring flows in ventilation ducts
    Controlling air and fire-protection dampers
    Frost protection for heat exchanges

    Additional Information:

  • Dwyer ADPS-04-2-N Adjustable Differential Pressure Switch

    Dwyer ADPS-04-2-N Adjustable Differential Pressure Switch

    Product Details:

    Brand Siemens, Baumer
    Media Type Gas, Liquid

    Dwyer ADPS-04-2-N Adjustable Differential Pressure Switch
    Adjustable differential pressure switch, set point range 0.12 to 1.60″ w.c., M20 connection.Dwyer ADPS Series Offers
    Features
    Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
    The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
    The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications
    Specifications
    Service: Air and non-combustible, compatible gases
    Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
    Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
    Switch Type: Single-pole double-throw (SPDT)
    Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
    Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
    Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
    Enclosure Rating: NEMA 13, IP54
    Mounting Orientation: Vertically, with pressure connections pointing downwards
    Mechanical Working Life: Over 106 switching operations
    Weight: 5.6 oz (160 g)
    Applications
    Monitoring air filters and ventilators
    Monitoring industrial cooling-air circuits
    Overheating protection for fan heaters
    Monitoring flows in ventilation ducts
    Controlling air and fire-protection dampers
    Frost protection for heat exchanges

    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Dwyer ADPS-03-2-N Adjustable Differential Pressure Switch

    Dwyer ADPS-03-2-N Adjustable Differential Pressure Switch

    Product Details:

    Brand Honeywell, Schneider, Siemens, Baumer
    Media Type Gas, Liquid

    Dwyer ADPS-03-2-N Adjustable Differential Pressure Switch
    Designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage.
    Adjustable differential pressure switch, set point range 0.20 to 2.00″ w.c., M20 connection.DPS Series Offers
    Features
    Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
    The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
    The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications
    Specifications
    Service: Air and non-combustible, compatible gases
    Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
    Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
    Switch Type: Single-pole double-throw (SPDT)
    Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
    Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
    Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
    Enclosure Rating: NEMA 13, IP54
    Mounting Orientation: Vertically, with pressure connections pointing downwards
    Mechanical Working Life: Over 106 switching operations
    Weight: 5.6 oz (160 g)
    Applications
    Monitoring air filters and ventilators
    Monitoring industrial cooling-air circuits
    Overheating protection for fan heaters
    Monitoring flows in ventilation ducts
    Controlling air and fire-protection dampers
    Frost protection for heat exchanges

    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit)
  • Magnehelic Gauge 0-50 Mm Dwyer

    Magnehelic Gauge 0-50 Mm Dwyer

    Product Details:

    Brand Dwyer

    Magnehelic Gauge 0-50 Mm Dwyer

    SpecificationMagnehelic® Gauge for high accuracy–guaranteed within 2% of full scale–and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic® Gauge movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

    The Magnehelic® Gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air

    specifications – Service:Air and non-combustible, compatible gases. (Natural Gas option available.)
    – Housing:Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
    – Pressure Limits:-20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
    – Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
    – Temperature Limits:20 to 140°F.* (-6.67 to 60°C).
    – Mounting Orientation:Diaphragm in vertical position
    – Process Connections:1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
    – Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
    – Accuracy:±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
    – Size:4″ (101.6 mm) diameter dial face. Description

    Gauge Type Magnehelic Differential
    Dial Size 100MM
    Pressure -20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
    Yes! I am interested
  • OMICRON Differential Pressure Gauge

    OMICRON Differential Pressure Gauge

    Product Details:

    Wetted parts Ss 304

    OMICRON Differential Pressure Gauge USA

    We are leading supplier and trader of OMICRON Differential Pressure Gauge USA. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge.
    Product Details:
    Pressure Range Model Number Pressure Range

    Pa / kPa
    0 – 0.25” S2000-60PA 0 – 60
    0 – 0.5” S2000-125PA 0 – 125
    0 – 1” S2000-250PA 0 – 250
    0 – 2” S2000-500PA 0 – 500
    0 – 3” S2000-750PA 0 – 750
    0 – 4” S2000-1KPA 0 – 1
    0 – 5” S2000-1.5KPA 0 – 1.5
    0 – 6” S2000-2KPA 0 – 2
    0 – 8” Zero Center
    0 – 10” S2300-60PA 30 – 0 – 30
    0 – 15” S2300-120PA 60 – 0 – 60
    0 – 20” S2300-250PA 125 – 0 – 125
    0 – 25” mm w.c.
    0 – 30” S2000-6MM 0 – 6
    0 – 50” S2000-10MM 0 – 10
    0 – 100” S2000-25MM 0 – 25

  • Minihelic II Differential Pressure Gauge Series 2-5000

    Minihelic II Differential Pressure Gauge Series 2-5000

    Minihelic® II Differential Pressure Gage Series 2-5000
    Combining clean design,small size and low cost with enough accuracy for all but the most demanding applications our SERIES 2-5000 Minihelic® II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig.

    Product Applications

    Room Positive Pressure Sensing
    Local Indication on Filter Status
    Face Velocity on Fume Hood
    Duct Pressures
    Cabinet Air-Purging
    Medical Respiratory Equipment
    Air Samplers
    Electronic Air Cooling Systems
    Laminar Flow Hoods

  • Series Wdg Weather Proof Digital Pressure Gauges

    Series Wdg Weather Proof Digital Pressure Gauges

    Product Details:

    Brand Dwyer

    The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.

    We are in the process of discontinuing this series, the suggested replacement is Series DPGA/DPGB.

    Product Applications

    • Pneumatic
    • Draft measurement
    • Filter monitoring
    • Industrial
    • Outdoor
    • HVAC roof-top
    • Flow

    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Series UGJ Utility Gage

    Series UGJ Utility Gage

    Product Details:

    Connection New, Bottom Connection
    Material Steel, Mild Steel

    Series UGJ Utility Gage
    The SERIES UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.

    California Residents: Click Here for Proposition 65 WARNING.
    Product Applications

    Air regulators
    Pneumatic systems

  • Series TRI2 Tridicator Gage

    Series TRI2 Tridicator Gage

    Series TRI2 Tridicator Gage
    The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.

  • Miniature Low Cost Differential Pressure Gauge Series S-5000

    Miniature Low Cost Differential Pressure Gauge Series S-5000

    Product Details:

    Brand sensocon

    Miniature Low Cost Differential Pressure Gauge Series S-5000
    Description
    The Series S-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing. The S-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.