dpengineers

Author: admin

  • Magnehelic Differential Pressure Gauge

    Magnehelic Differential Pressure Gauge

    Product Details:

    Brand dwyer
    Measuring Range 0-200 mm wc

    Select the Magnehelic® gage for high accuracy and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or levelling problems. It’s inexpensive, too.

    The Magnehelic® gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, the pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves and monitors blood and respiratory pressures in medical care equipment.

    Note: May be used with Hydrogen. Order a Buna-N diaphragm.

    Product Applications:

    • Filter Monitoring
    • Air Velocity with Dwyer Pitot Tube
    • Blower Vacuum Monitoring
    • Fan Pressure Indication
    • Duct, Room or Building Pressures
    • Clean Room Positive Pressure Indication

    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Dwyer Make Magnehellic Pressure Gauges

    Dwyer Make Magnehellic Pressure Gauges

    Product Details:

    Material Steel
    Condition New
    Connection New, Bottom Connection

    Dwyer Make Magnehellic Pressure Gauges Magnehellic Differential Pressure gauges:
    •Model : 2000 Series
    •Service : Air And Non- Combustile, compatible gases ( Natural gas option available)
    •Housing : Die Cast Aluminium Case & Bezel, With Acrylic Cover
    •Exterior Finish is Coated Gray to Withstand 168 Hour Salt Spray Corrosion test
    •Accuracy : +/- 2% Of F.S.
    •Pressure Limits : -20 in Hg To 15 Psig (-0.677 to 1.034 Bar) MP
    •Option : 35 psig ( 2.41 bar), HP option : 80 psig ( 5.52 Bar)
    •Overpressure : Relief Plug Opens At Approximately 25 Psig (1.72 bar), standard gauges only,
    •Temperature Limits : -6.67 to 60 Deg C
    •Size : 4″ (101.6 mm) Diameter Dial Face
    •Mounting Orientation : Diaphragm in Vertical Position. Consult Factory for other position orientations,
    •process connection : 1/8″ NPT (F) Duplicate High & Low
    •pressure Tapes-One Pair Side And One pair back

  • Dwyer 2000-20 CM Differential Pressure Gage

    Dwyer 2000-20 CM Differential Pressure Gage

    Dwyer 2000-20 CM Differential Pressure Gage

    Dwyer 2000-20CM Differential pressure gage, range 0-20 cm w.c. (cm of water), minor divisions .50.
    Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.
    The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
    Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

    Features
    Bezel provides flange for flush mounting in panel.
    Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
    Precision litho-printed scale is accurate and easy to read.
    Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
    Pointer stops of molded rubber prevent pointer over-travel without damage.
    “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
    Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
    Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
    Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
    Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
    Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
    Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
    Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
    Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
    O-ring seal for cover assures pressure integrity of case.

  • Dwyer USA Magnehelic Gauge

    Dwyer USA Magnehelic Gauge

    Product Details:

    Brand Dwyer

    Magnehelic gauge dwyer USA 

    We are authentic trader, supplier and exporter of Magnehelic Gauge Dwyer USA in Delhi available with following details.

    • Specifications: Differential Pressure gauge
    • Make:Dwyer USA
    • Model:Magnehelic Gauge
    • Range: Multiple ranges are available
    • Units: MWC, INWC, PASCAL, KPA

    Additional Information:

    • Pay Mode Terms: D/A,D/P,T/T (Bank Transfer)
    Yes! I am interested
  • Dwyer Make Digital Differential Pressure Gauges

    Dwyer Make Digital Differential Pressure Gauges

    Product Details:

    Brand Dwyer

     

    Dwyer Digital Differential Pressure Gauge

    experience of this domain, we provide clients with the premium quality of Dwyer Digital Differential Pressure Gauge. For regulation and monitoring of pressure of different industrial applications, the offered Dwyer digital differential pressure gauge is used. Simple calibration and thermal stability make the pressure gauge highly demanded.

    Features:

    • Simplifies calibration with its digital push button
    • Four button operation reduces set up time
    • Easy to use and maintain

    Specifications:

    • Operating Temp.: -20~+70 Oc
    • Measuring Range: Medium-pressure Gauge
    • Accuracy: 0.25

    Specifications:

    • Pressure Range: 0-100Mpa
    • Color: Silver
    • Diameter:100mm
  • Dwyer Air Velocity Transmitter

    Dwyer Air Velocity Transmitter

    Product Details:

    Power 220v
    Application Measuring Meter

    As a patron centric organization, we provide clients with the premium quality of Dwyer Air Velocity Sensors. Used for monitoring the air velocity of different industrial applications, the air velocity sensors are manufactured by using latest technology. Compact design, sturdy construction and high functionality, make the Dwyer air velocity sensors highly demanded.

    Features:

    • Ideal for air velocity monitoring applications
    • Compact design
    • Easy operations and calibrations

    Specifications:

    • Customized: Customized
    • IP Rating: IP65
    • Measuring Medium: Temperature

    Specifications:

    • Output Signal Type: Digital Type
    • Protection: IP54
    • Measuring Range: 20-150Pa

  • Semi-Rigid Aluminum Duct

    Semi-Rigid Aluminum Duct

    Product Details:

    Minimum Order Quantity 22083434 Number
    Brand D.P.ENGINEERS

    Specifications:

    • Material: Aluminium
    • Inner Diameter: 1.8″-16″
    • Color: Grey
  • Semi Rigid Spiral Duct

    Semi Rigid Spiral Duct

    Product Details:

    Sizes 75 mm to 300 mm Diameter
    Material Aluminium

    Specifications: 

    • Material: Aluminium
    • Sizes: 75 mm to 300 mm Diameter
    • Operating Pressure: 3000Pa
  • Heavy Duty Semi-Rigid Aluminium Ducting

    Heavy Duty Semi-Rigid Aluminium Ducting

    Product Details:

    Brand d.p.engineers

     

    Heavy Duty Semi-Rigid Aluminium Ducting
    We supply high quality of Aluminum Ducting for your Clients .This lightweight malleable and corrosion resistant metal is used as cladding on exposed Rectangular or Spiral duct. Apart from this, Plain type (Reflector / Matt finish) is also widely used as air ducts in areas such as swimming pool, clean rooms of sensitive/industrial films etc.

    Specifications:

    • Color: Silver
    • Material: Aluminum
    • Thickness: 1-5 mm
  • HVAC Duct

    HVAC Duct

    Product Details:

    Brand D.P. ENGINEERS
    Usage Industrial Use, Residential Use, Office Use

    Specifications:
    • Type: Air Ducts
    • Diameter: 4″ to 20″
    • Length: 25 ft